Eddynet Hydraulic Pick-up Sweeper Attachment for Tractors

RTH24-05 / RTH24-06 / RTH24-07 / RTH24-08

Brush Drive

  • Requires 16 GPM at 2000 PSI (60 LPM at 138 bars) for a recommended brush speed of 150 RPM.
  • Brush speed is controlled by the equipment engine speed.
  • Powered by single orbital motor mounted to the core of the brush.
  • Third valve is required to operate the brush, a fourth valve is required to operate the hydraulic angle change and a fifth valve is required to open or close the upper.
  • Hydraulic hoses that supply the third valve of the equipment must be 3/4" inside diameter.

Brush

  • Choice of poly or poly / wire bristles.

Open / Close Upper

  • 2 hydraulics cylinder 1 1/2" diameter to opening the upper 90° (without remove the upper).
  • Hydraulic hoses with quick coupler to hook up to the fourth valve.
  • 0.6 cubing yard.

Mechanical Components

  • Pressure to the ground is controlled by the weight of the brush.
  • Shock absorbers to reduce brush hopping.
  • The brush is mounted on two 1 3/4" (45 mm) diameter flange bearing.
  • Stopper to protect the shock absorber.
  • Anchor rings for handling and transportation.
  • Storage stands.
  • Heavy duty motor safety guard.
  • Install on the three points hitch cat.2.
  • 16.5- 8 diameter rear caster wheel.

Frame

  • 90% of the parts are laser cut, cross member are heavy duty rectangular tubing.
  • 16 gauge steel hood covering 180° of the brush.
  • All main parts of the frame, including the hood, are bolted together for a quick replacement.
  • 1 1/2" (38 mm) diameter pivot axle for the angle device.

Finish

  • All parts are sandblasted individually.
  • Coat of epoxy primer and polyurethane top coat.
Eddynet Hydraulic Sweeper Attachment for Tractors.

Eddynet Sweeper Options:

  • Hydraulic angle change with 2" diameter hydraulic cylinder.
  • Hydraulic hoses with quick coupler to hook up to the fourth valve (if available).
  • 150 or 200 gallons water tank with support to be mounted directly on the quick attach.
  • 12 volt electric water pump and hardware.
  • 4 spray nozzles mounted into the hood for a direct watering of the brush.
  • diverter valve for hydraulic angle.
  • P.T.O pump 16 gpm.
  • Medium travel spring.
  • Gutter broom on the tractor.

Eddynet Hydraulic Pick-up Sweeper for Tractors

© 2020 Colvoy Equipment. All rights reserved.
Industrial vegetation management and snow removal equipment: mower sales, mower parts and rentals.
Roadside mowers, boom mowers,arm mowers, flail mowers, roadside vegetation management. Tiger, Bomford, Spearhead, Votex, Herder, Major, RasterMaster, Truxor, Bagela, Eddynet, Metal Pless and Promac dealer.