Herder-Fermex Stump Cutter SCE-630H 150 L
The SCE-630H 150L is the middle stump cutter in this series. This model is suitable for most excavators between 10 and 20 tons. This stump cutter is executed with a hydraulic motor for an oil flow of between 110 and 150 l./min. (max. 350 bar).
Herder Stump Cutter SCE-630H 150 L Features:
- Middle stump cutter in this series.
- Suitable for excavators between 10 and 20 tons.
- Cutting wheel with a diameter of 63 cm (72 cm with teeth).
- Hydraulic motor with oil flow between 110 and 150 l./min.
- Maximum freedom of movement thanks to hydraulic drive.
SCE-630H 150l STUMP CUTTER | ||
Required Volume Flow (l./min/) | 110 – 150 | |
Max. Operating Pressure (bar) | 350 | |
Number of Required Double Action Functions | 1 | |
Safety | Overpressure Relief Valve | |
Diameter Cutting Wheel (mm) | 630 | |
Number of Teeth | 40 |