Truxor Pile Driver DM 350
Truxor Pile Driver DM 350 is a mast with a winch system for lifting and mounting plastic, wooden and metal piles and poles. It is equipped with a Hycon hydraulic hammer which is used in combination with the Pile driver DM 350 and generates very powerful vibrations, resulting in effective piling in water.
The Pile Driver DM 350 is mounted onto the frame bracket of the lifting arm. The X + Y movement is controlled from the operator’s seat. The hydraulic hammer is attached to the winch using the bracket for piles or poles. Delivered complete with a winch. Hycon hydraulic hammer is not included.
Truxor Pile Driver Features
- Equipped with a Hycon hydraulic hammer which is used in combination with the Pile driver DM 350.
- X + Y movement is controlled from the operator’s seat.
- Powerful vibrations, resulting in effective piling in water.
- Delivered complete with a winch.
| TRUXOR PILE DRIVER 350 | |
| Length | 4.5 m |
| Weight | 63 kg |
| X Movement | Max 1200 mm |
| Y Movement | Max 1200 mm |
| Lifting Capacity | max 130 kg |
| Max Pole/Pile Length | 3 m |
| Item no | 71-10600 |
| SPONT U-PROFILE | ||
 |
 |
|
| Weight | 10,50 kg / m2 | |
| Width | 310 mm | |
| Material | Plastics, 5 mm | |
| Length 2 m | Item no. 71-135820 | |
| Length 2.5 m | Item no. 71-135825 | |
| Length 3 m | Item no. 71-135830 | |
| Length 4 m | Item no. 71-135840 | |
| Trim corner 90° | Item no. 71-1300 | |
| Trim joint. Two-way | Item no. 71-1329 | |
| Trim joint. Three-way | Item no. 71-1536 | |
| MAST EXTENSION | ||
 |
||
| Weight | 7 kg | |
| Length | 1 m | |
| Max pole/pile length | 4 m | |
| Item no. | 71-10700K | |
| HYCON HYDRAULIC HAMMER ACCESSORIES | ||
 |
||
| U-Profile Pile Bracket (71-1358) Weight: 12 kg | Item no.71-14800 | |
| Round Pole Bracket, 60 mm | Item no. 71-4012575 | |
| Round Pole Bracket, 80 mm | Item no.71-4012585 | |