Eddynet Hydraulic Pick-up Sweeper for Forklifts

RLH24-06

Eddynet Sweeper Features:

• Supply by equipment hydraulic system.
• The brush is driven by single hydraulic motor coupled directly to the core by a splined shaft.
• 24"Ø broom, polypropylene, wire or polypropylene/wire.
• Brush width: 6'.
• 14 gage hood covering 180° of the brush.
• Swing arm system allows the brush to follow ground variations.
• Brush is supported by two flange bearings.
• Two 10" diameter front caster wheels and 1 10" diameter rear caster wheels.
• Anchor and lifting rings.
• Manual opening of the hopper.
• Hopper capacity: 6 cubic feet.
• Epoxy primer and urethane paint.
• 10' hydraulic hoses ¾"Ø with spool motor.
• Weight: 480 kg or 1150 lbs.

Necessary Features on Equipment:

• Requires 12 gpm at 2000 PSI with a maximum of 25 gpm at 3000 PSI.
• ¾"Ø hydraulic hoses from pump to the broom.
• One auxiliary oil exit (side shift) to supply the brush.
• Minimum width between forks: 24".
• Maximum width between forks: 38".
• Maximum forklift width: 6".